Today Fujifilm have released some previously announced major updates for the X-Series interchangeable X-Mount cameras.  Updates are across the board with new features and enhancements for all bodies right from the X-Pro1 to the X-M1.

To cut straight to it, follow the link right below and select your body to download the latest update.

Copy the file to the root of and SD card, then turn your camera on pressing the DISP/BACK button and follow the instructions.

If the camera states that it cannot find the firmware you might want to check that your computer hasn’t renamed the .DAT file due to having an older version of a firmware update for that camera in your Downloads folder.

Updating is quick and painless, and I managed to do 3 bodies in less than a couple of minutes.

http://www.fujifilm.com/support/digital_cameras/software/fw_table.html

Quick Summary

The X-T1 is clearly the big winner here with no less than 20 updated options or new features!

The X-T1 gains an electronic shutter, allowing shooting up to 1/32000th of a second for those with the %^mm f/1.2 that will mean wide-open shooting in broad daylight!

There are quite a number of new display options for the LCD and how the image is previewed on the X-T1, including a “natural” preview that gives a low contrast view so you can see a wider range of shadows in the display that would normally be too contrasty with some of the film simulation modes.  I guess this more accurately reflects the image you get when shooting RAW.

Most notable and useful new options for me are..

Classic Chrome simulation for the X-T1 and X-E2, although incomprehensibly not for the other bodies.

Direct printing to Instax SP1 for the X-T1 and X-M1, again bizarrely not for the X-E2, which also has built-in WiFi.

The X-E2 does however get interval timing.

For full details of the firmware updates, read below.

X-Pro1

The firmware update Ver.3.40 from Ver.3.30 incorporates the following issues:

  • “AF+MF” function enables seamless manual focusing. After half pressing the shutter to autofocus on the subject, fine adjustment can then be made using the manual focus ring.

X-T1

The firmware update Ver. 3.00 from Ver.1.10 (X-T1) / 2.00 (X-T1 Graphite Silver Edition) incorporates the following issues (X-T1 / X-T1 Graphite Silver Edition):

  • 1.High-speed electronic shutter with a maximum speed of 1/32000sec. (This function is incorporated in X-T1 Graphite Silver Edition.) The FUJINON XF Lens series lineup includes a number of fast fixed focal length lenses which boast very high sharpness with the aperture wide open, producing excellent out of focus “bokeh”. However, fast apertures are difficult to use if the light is too bright, so to ensure users can create shallow depth-of-field effects, the camera is now equipped with a fully electronic shutter offering a maximum shutter speed of 1/32000sec. The mechanical shutter will not operate at all when any speed for the electronic shutter is selected, which also delivers a completely silent shooting experience; perfect for shots of sleeping children, pets, weddings, and more. In addition, it is possible to set the electronic shutter in 1/3 steps from a range of 1sec to 1/32000sec.

    [How to set]
    Select “ELECTRONIC SHUTTER” or “MECHANICAL+ELECTRONIC” of the new “SHUTTER TYPE” option in the shooting menu.
    Shutter speeds faster than 1/4000 sec can be chosen by rotating the shutter speed dial to 4000 and then rotating the command dial.
    *Some functions are restricted when the”ELECTRONIC SHUTTER” or “MECHANICAL+ELECTRONIC” is selected.

    • The shutter speed and sensitivity are restricted to values of 1/32000-1 sec and ISO 6400-200 respectively.
    • Regardless of the option selected, the mechanical shutter is used for motion panoramas.
    • In the burst mode, focus and exposure are fixed at the values for the first shot in each burst.
    • In the range where the electronic shutter works, the long exposure noise reduction doesn’t work.
    • In the range where the electronic shutter works, the FLASH MODE is fixed to the “SUPPRESSED FLASH”.
      (In X-T1 Graphite Silver Edition, the flash is suppressed if “MECHANICAL+ELECTRONIC” is selected. With this upgraded firmware, the flash can be used when the mechanical shutter works.)

    *Notice when using the electronic shutter.

    • Distortion may be visible in shots of moving subjects.
    • Band-like unevenness may occur in shots taken under fluorescent lights, other flickering or erratic illumination.
  • 2.Shutter Sound
    The shutter sound can be muted if desired. (This function is incorporated in X-T1 Graphite Silver Edition.)

    [How to set]
    Select the new “SHUTTER SOUND” and “SHUTTER VOLUME” options in the setup menu to choose the type and volume of the sound made when the shutter is released.*Notice

    • When taking pictures with the shutter muted, respect your subjects’ image rights and right to privacy.
  • 3.Classic Chrome Film Simulation mode brings more creative power to the X Series
    (This function is incorporated in X-T1 Graphite Silver Edition.)
    The X Series’ Film Simulation modes represent Fujifilm’s wealth of experience in color reproduction technology. New to the suite of effects is Classic Chrome, which delivers subtle colors and beautifully muted tones reminiscent of vintage reversal film. Using Classic Chrome on cityscapes, for example, will give shots a historic feel, while fashion photos gain an emotive, nostalgic look. Classic Chrome strengthens the film simulation line up and enhances the creative power of the X-T1.

    [How to set]
    Select the “CLASSIC CHROME” option of the “FILM SIMULATION” in the shooting menu.

  • 4.Natural Live View function is just like the naked eye.
    One of the great benefits of an electronic viewfinder is that ‘what you see is what you get’; the final image is displayed in real-time so any Film Simulation modes or other effects can be checked while shooting. But users sometimes need to see colors close to how they’re viewed with an optical finder, or to focus on shadow detail, which some high-contrast effects block out. To aid this, the Natural Live View function has been added and, when “PREVIEW PIC. EFFECT” is turned Off in the menu, an image close to the naked eye is displayed during live view.

    [How to set]
    Select “ON” in the “PREVIEW PIC. EFFECT” of the new “SCREEN SET-UP” in the setup menu.

  • 5.EVF / LCD Color Control
    “EVF COLOR” and “LCD COLOR” options in the setup menu to adjust the hue of the electronic viewfinder and LCD monitor.

    [How to set]
    Select the “EVF COLOR” and “LCD COLOR” options of the new “SCREEN SET-UP” in the setup menu.

  • 6.AF+MF
    “AF+MF” function enables seamless manual focusing. After half pressing the shutter to autofocus on the subject, fine adjustment can then be made using the manual focus ring.

  • 7.Direct selection of AF area
    The update will let users select the focus area using the 4-way controller, without pressing the Fn key.

    [How to set]
    Select the “FOCUS AREA” in the “SELECTOR BUTTON SETTIG” of the “BUTTON / DIAL SETTING” in the Setup Menu.

  • 8.Unlocked AE-L / AF-L Buttons
    The function of the AE-L / AF-L button is currently locked, but will be interchangeable, depending on the user’s preference.

    [How to set]
    Select the “AE-L / AF-L BUTTON SETTIG” of the “BUTTON / DIAL SETTING” in the Setup Menu.

  • 9.Change the size of the Focus frame in the Manual Focus
    In the Manual Focus mode, the size of the Focus frame for Instant AF can be changed by the command dial.
  • 10.Direct selection of Macro mode
    “ON” or “OFF” of Macro mode can be directly selected without using the shooting menu.
  • 11.Q. Menu customization
    To make the Q Menu (used for quick access of frequently-used items) even more efficient, the update will allow its items and layout to be changed to the user’s preference.

    [How to set]
    1. Select the “EDIT / SAVE QUICK MENU” in the setup menu (or pressing Q button for a while).
    2. Highlight the item you wish to change and press the MENU / OK button.
    3. You will be given choices of items to assign to the selected position in the quick menu.
    *Select the “NONE” to assign no item to the selected position.

  • 12.New Video Frame rates (50P / 25P / 24P)
    As well as the existing 60fps and 30fps selections, 50fps, 25fps and 24fps options will be available with the update. 50 fps and 25 fps allow video editing in the PAL regions, such as Europe, without converting the frame rate. 24fps offers a cinema-like view.
  • 13.Manual Shooting in Video mode
    The update will enable ISO sensitivity selection prior to shooting videos, as well as the ability to adjust aperture and shutter speed during movie recording.
  • 14.Phase detection AF support for Instant AF
    In Instant AF mode, which is operated by pressing the AF-L button during manual focusing, the update will enable Phase Detection AF, providing faster focusing speeds.
  • 15.Interlocking of Metering and Focus areas
    Users will be able to interlock the AF area position with the Metering area when Spot Metering mode is selected.

    [How to set]
    Select “ON” in the “INTERLOCK SPOT AE & FOCUS AREA” of the shooting menu.

  • 16.Expansion of shutter speed in Program Shift mode
    In the current Program Shift mode, the slowest-speed setting is 1/4sec., but this will increase to a maximum of 4secs.
  • 17.Addition of options in Function(Fn) setting
    Add “Flash compensation”, “Shutter type”, “Preview Pic. Effect”, “Preview EXP. / WB in Manual mode” and “Lock” in “Function” Setting
  • 18.instax Printer Print
    Photos can be directly sent from the camera to the Fujifilm instax SHARE Smartphone Printer to instantly print on Fujifilm Instant Color Film “instax mini”.

    [How to set]
    Type a printer name(SSID) and a password in the “instax PRINTER CONNECTION SETTING” of “CONNECTION SETTING” in the Setup Menu.
    * For detail, please refer to “Printing from a Digital Camera to an instax SHARE Printer” (PDF:1.63MB).

  • 19.Lock Function
    Add software lock function during shooting mode. The update will let users prevent from the unexpected dial/button operation.

    [How to set]
    Select the “ALL FUNCTION” or “the SELECTED FUNCTION” in the “LOCK SETTING” of the “LOCK” in the Setup Menu.
    Select the function you wish to lock in the “FUNCTION SETTING” before the “SELECTED FUNCTION” is selected.

  • 20.Three Custom White Balance
    Expand the number of CUSTOM WHITE BALANCE from one to three.
    By registering different conditions in advance of the shooting, users can change white balance conditions quickly.
  • 21.Expand EVF / LCD displaying types in manual exposure mode
    In manual exposure mode, the EVF / LCD are displayed with previewing set shooting conditions.
    To display, along with a mode of ignoring exposure condition, users will be able to select a mode of ignoring white balance condition.
    The update will let users expand variations of external flash photography especially with modeling lights of different color temperature.
    By registering the function to the Fn button, users will be able to change settings in quick operations.

    [How to set]
    According to your shooting condition, select one of the “PREVIEW EXP. / WB”, “PREVIEW WB” and “OFF” in the “PREVIEW EXP. / WB IN MANUAL MODE” of the “SCREEN SET-UP” in the Setup Menu. In shooting with a flash, “OFF” mode let you view objects with appropriate exposure and white balance.

  • 22.PC tethered shooting support
    New HS-V5 software (optional accessory) allows users to tether and control the camera from the PC and transfer images shot on the camera over to the PC automatically.

    [How to set]
    Select the mode you wish to use in the “USB MODE” of the Setup Menu.
    *For detail, please refer to the Help page of HS-V5 on this website.
    *Notice
    When HS-V5 is not used, select MTP(PTP). If other modes are selected, images are not recorded in a memory card and images are not transferred to a PC via a USB cable. In case of “PC SHOOT FIXED”, you cannot turn off a camera until image transfer is completed via a USB cable with the HS-V5. (Default : MTP(PTP))

  • 23.Change the function of FACE DETECTION in Focus-Frame Selection AF
    When a face is detected, the Focus frame is shown on the face. Otherwise, the position of the Focus frame doesn’t move.
  • 24.When pressing AE-L button, exposure is reflected to the live view.
  • 25.When AF is locked by pressing AF-L button, the AF lock is held during zooming.
  • 26.Add the icon to show RAW shooting is not available when an expanded sensitivity range is selected in RAW shooting. (Currently, the RAW icon disapppears.)
  • 27.The settings below in the Setup menu are changed from the description on the Owner’s Manual.
    The following settings move into the new “BUTTON / DIAL SETTING” in the Setup menu.

    • “FUNCTION(Fn) SETTING”
    • “COMMAND DIAL SETTING”

    The following settings move into the new “CONNECTION SETTING” in the Setup menu.

    • “WIRELESS SETTING”
    • “PC AUTO SAVE SETTING”
    • “GEOTAGGING SET-UP”

X-E1

The firmware update Ver.2.40 from Ver.2.30 incorporates the following issues:

  • “AF+MF” function enables seamless manual focusing. After half pressing the shutter to autofocus on the subject, fine adjustment can then be made using the manual focus ring.

X-E2

The firmware update Ver.3.00 from Ver.2.10 incorporates the following issues:

  • Regarding operations of items below from 1 through 4, refer to “X-E2 New Features Guide [Ver.3.00 or later]” below.
  • 1.AF+MF
  • “AF+MF” function enables seamless manual focusing. After half pressing the shutter to autofocus on the subject, fine adjustment can then be made using the manual focus ring.
  • 2.Enhanced wireless function for shooting from your smartphone or tablet devices*
  • By downloading the freeFUJIFILM Camera Remote** app to yoursmartphone or tablet devices, users can use the Remote Control function, which allows a wealth of control, even from a distance. This functionality is great for a wide variety of shots, including group photos, self-portraits and animals in their natural habitat.
    • *Android™, smartphone and table devices, iPhone / iPad.
    • **After updating the Firmware Version 3.00, FUJIFILM Camera Application app cannot be used.

    Requires installation ofFUJIFILM Camera Remote app to yoursmartphone or tablet devices

  • 3.New Classic Chrome Film Simulation
  • The X Series’ Film Simulation modes represent Fujifilm’s wealth of experience in color reproduction technology. “Classic Chrome”, which delivers subtle colors and beautifully muted tones reminiscent of vintage reversal film, has been newly added to the existing selection.
  • 4.Interval timer shooting
  • The new Interval timer shooting function allows X-E2 users to capture time lapse photography. Set the starting time, the shooting interval (1 sec. to 24 hr.) and finally the number of frames (1 – 999), and the camera does the rest.

X-M1

The firmware update Ver. 1.20 from Ver. 1.10 incorporates the following issues:

Regarding operations of No.1, refer to “Printing from a Digital Camera to an instax SHARE Printer” below.

  • 1.Addition of compatibility with “instax SHARE SP-1”
  • Images can be directly transferred to the “SP-1” from a camera and then printed.
  • 2.Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR”
  • To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 3.Change of aperture display for zoom lenses
  • Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.
  • 4.Improvement of recorded sound
  • Sound quality of a movie shooting is improved.

 

Comments

comments

About The Author

Matthew Maddock is a commercial photographer based in the Lake District, UK. Specialising in the hospitality and outdoor sports industry. He is a Fujifilm X-Photographer and Getty Images contributor. His portfolio can be viewed at memaddock.co.uk

Related Posts

One Response

  1. Fujifilm X-Series Firmware updates now availabl...

    […] Quick SummaryThe X-T1 is clearly the big winner here with no less than 20 updated options or new features!…Most notable and useful new options for me are..Classic Chrome simulation for the X-T1 and X-E2, although incomprehensibly not for the other bodies.Direct printing to Instax SP1 for the X-T1 and X-M1, again bizarrely not for the X-E2, which also has built-in WiFi.The X-E2 does however get interval timing.For full details of the firmware updates, read below….  […]

%d bloggers like this: