Firmware update for the Fujifilm X-T10 to v1.01

Fujfiilm have released a firmware update for the X-T10 today which includes a number of small of improvements and fixing a problem that would not allow X-T10 owners to download images to Windows 10 via a USB cable.  This is an issue on a few other Fujifilm cameras too and a timetable for firmware updates has been released.  Until then, importing of images on the affected cameras can be done by removing the SD card and importing through an SD card reader.

Fixes for the other cameras as scheduled as follows.

End of August 2015

X-E2, X-A2, X-Pro1, X100T, X100S, X30, X20 and XQ2

End of December 2015

X-E1, X-M1, X-A1, X100, X10, XQ1, XF1, X-S1
F1000EXR, F900EXR, F850EXR, F820EXR, F800EXR, F770EXR, F750EXR, F660EXR, F600EXR,
F550EXR, F500EXR, F300EXR, F80EXR, HS50EXR, HS35EXR, HS30EXR, HS25EXR, HS20EXR,
Z2000EXR, Z1100EXR, Z1000EXR, Z950EXR, Z900EXR, Z800EXR, Z700EXR, JZ500, JZ300
and REAL 3D W3

Download the X-T10 firmware here

http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt10/index.html

Detail of the X-T10 v1.01 update

The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:

  • 1.Improvement of “EYE DETECTION AF” speed when used with XF90mmF2 R LM WR
    • “EYE DETECTION AF” speed is improved when used with XF90mmF2 R LM WR in case that “FACE DETECTION” and “EYE DETECTION AF” are ON in “AUTO FOCUS SETTING” of the Shooting Menu.
  • 2.Operational improvement of Fn1 Function button (Default setting : movie shooting)
    • The shortcut function to Fn1 BUTTON SETTING by pressing the button more than 2 sec. is removed. To avoid accidentally pressing the button when turning the Exposure compensation dial, pressing the button approx. 0.5sec. is required to start the function allocated to the button. This improvement is to avoid unexpected appearance of the SETTING when Fn1 function is needed.

      <Note-1>
      Functions of Fn2 through Fn7 button remain same.
      <Note-2>
      Steps to change the setting of Fn1 are same as usual like below.
      ・Change it in the function(Fn) setting menu appeared by pressing DISP/BACK button for a while.
      ・Change it through Setup Menu>BUTTON/DIAL SETTING>FUNCTION (Fn) SETTING.

  • 3.Angle difference between jpeg image and jpeg image converted from RAW file
    • Currently, there is angle difference between jpeg image (including jpeg images converted in a camera) and jpeg image converted from RAW file by RAW FILE CONVERTER EX2.0 etc. The jpeg image angle converted from RAW file is a little bigger.
      With this upgrade, the jpeg image angle is matched to one which is converted from RAW file. This symptom happens only when lenses below is used. In case of zoom lenses, this happen in wide-angle side.

      XC16-50mmF3.5-5.6 OIS, XC16-50mmF3.5-5.6 OIS Ⅱ, XF18-55mmF2.8-4 R LM OIS,
      XF10-24mmF4 R OIS, XF16-55mmF2.8 R LM WR, XF18-135mmF3.5-5.6 R LM OIS WR,
      XF18mmF2 R and XF27mmF2.8

  • 4.Support for Windows10
    • The phenomenon is fixed that images in a camera cannot be transferred to a Windows10 PC via a USB cable.

Comments

comments

%d bloggers like this: